Temperature Indicator – DPI-966-T
Product Description :
DPI-966-T – Temperature and Process Indicator.
Configuration: (2 AI + 2 AO + 1 SO)
Size: 96 x 96 x 120
Part No: 1307
Technical Specification
| Parametes | Description |
|---|---|
| Process Input 1 and 2 | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input 1 and 2 | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple (Any one to be specified by User – and not user selectable) |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1oC for thermocouples and 0.1oC for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.5" Red 7-segment display for 1st Input reading. |
| 4 digit 0.5" Green 7-segment display for 2nd input reading. | |
| Settings | Using Front panel feather touch the keyboard to set various parameters like SPAN HI/LO values, MODBUS Slave ID, Input selection, calibration, etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. Available for each Input. (Optional) |
| Digital Serial Interface | Optically isolated 2 wire RS485 over Modbus RTU protocol. (Slave mode with programmable Modbus address). (Optional) |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |