Basic PID Temperature Controller – PID-903
Product Description :
PID-903 Temperature and Process Controller
Configuration : ( (1AI + 2DO + 1AO)
Size (mm) : 96 x 96 x 75
Technical Specification
Paramters | Description |
---|---|
Process Input (AI) | 4-20mA or 0-10V |
Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
-1999 to +9999 with programmable decimal point (5 Digit models) | |
Resolution | 0.1,0.01,0.001 |
Temperature Input(AI) | Thermocouple type – J, K, R, S, B |
RTD type – (Pt-100)/ 2, 3 or 4 wire sensors | |
Temperature Range | As shown in the Input and Range Selection table. |
Resolution | 1 °C for thermocouples and 0.1 °C for Pt-100. |
Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
Indicating Accuracy | +/- 1 °C for Thermocouple throughout the range and +/- 0.1 °C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal. |
Display | 4 digit 0.5" Red 7-segment display for process variable. |
4 digit 0.5" Green 7-segment display for set value and PID parameters | |
Settings | Using Front panel feather touch key board to set various parameters like Set values, Hysterisis values, Span hi/lo values, MODBUS slave ID, Input selection, calibration etc |
PID Values | Prop. Band (P) = 0.0 to 100.0% of Span, Integral (I) = 0.00 to 5.00 resets/minute, Derivative (D) = 0.00 to 5.00 miutes, CYC= 2 to 30 secs |
Control Action | Analog and Switching PID algorithm |
(Direct or Reverse action as required) | |
Control Output | 1. SSR drivers 2. 4-20mA/0-5V/0-10V |
Alarm Output | 1 to 4 no. of Relays for event or High/Low Alarms |
Retransmission Output (AO) | 4-20mA linearized and proportional to the selected input type and range. RL max = 300 Ohms. |
2nd Analog Output Not available if used for Control Output. | |
Serial Output (SO) | RS485 on MODBUS protocol with programmable slave ID |
Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
Size | 96 x 96 x 75 |
Enclosure | ABS plastic with polycarbonate front graphic. |