Advanced PID Temperature Controller – PID-966
Product Description :
PID-966 – Temperature and Process Controller.
Configuration : ( (1AI + 2AO + 2DO + 1SO)
Size (mm) : 96 x 96 x 120
Technical Specification
| Paramters | Description |
|---|---|
| Process Input (AI) | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with a programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input(AI) | Thermocouple type – J, K, R, S, B |
| RTD type – (Pt-100)/ 2, 3 or 4 wire sensors | |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1 °C for thermocouples and 0.1 °C for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1 °C for Thermocouple throughout the range and +/- 0.1 °C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal. |
| Display | 4 digit 0.5" Red 7-segment display for process variable. |
| 4 digit 0.5" Green 7-segment display for set value and PID parameters | |
| Settings | Using Front panel feather touch key board to set various parameters like Set values, Hysterisis values, Span hi/lo values, MODBUS slave ID, Input selection, calibration, etc. |
| PID Values | Prop. Band (P) = 0.0 to 100.0% of Span, Integral (I) = 0.00 to 5.00 resets/minute, Derivative (D) = 0.00 to 5.00 minutes, CYC= 2 to 30 secs |
| Control Action | Analog and Switching PID algorithm |
| (Direct or Reverse action as required) | |
| PID Control Output | 1. SSR drivers 2. 4-20mA/0-5V/0-10V |
| Alarm Output | 2 nos. of Relays for event or High/Low Alarms (Contacts are rated for 5A @ 230VAC). |
| Retransmission Output (AO) | 4-20mA linearized and proportional to the selected input type and range. RL max = 300 Ohms. |
| Serial Output (SO) | RS485 on MODBUS protocol with programmable slave ID |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |